Aqua Master Tools P700 Pro 2

The innovative P700 Pro2 Combo Meter, with its modern, robust housing, is equipped with a large display that makes all measurements easy to read. The software has also been upgraded, allowing precise measurements to be read more quickly. The electrodes can be easily replaced if they become worn or defective.

The Combo Meter P700 Pro2 is ideal for measuring pH, EC, CF, PPM, and temperature values ​​in liquid plant food, swimming pool water, hot tubs, and pond water. You can easily and quickly switch between the different parameters at the touch of a button. The meter is pre-calibrated and supplied with batteries.

use

1. Plug the power cord into the socket and connect the USB plug to the measuring device.
2. Connect the pH and EC electrodes to the meter.
3. Remove the protective cap from the pH and EC electrodes.
4. Turn on the measuring device.
5. Immerse the pH and EC electrodes in the liquid to be measured and gently rotate them until the measured values ​​stabilize.
6. Use the C/F button to switch between Celsius and Fahrenheit. Use the MODE button to switch between EC/CF and PPM measurements.
7. Turn off the meter after use.
8. Clean the pH and EC electrodes with tap water to minimize the risk of contamination.
9. Replace the protective caps on the pH and EC electrodes.

The meter is also suitable for continuous use. For this, the electrodes must be immersed in the solution to be measured. Please note that the device will then need to be calibrated more frequently. Also, be sure to check for algae buildup on the electrodes and clean them thoroughly if necessary.